Open-source · Mac, Windows, Linux

A timegrapher that measures every beat, and keeps them.

An open-source timegrapher for mechanical watches that measures every beat and keeps the record. Rate, amplitude and beat error live from a microphone, the paper strip, a history of your watches, and analysis that runs for days.

Download Read the guide

Rate+8.9± 0.2 s/d
Amplitude298± 0.6°
Beat error0.16± 0.01 ms
From the README's example: a 10-minute recording at 28,800 bph, lift angle 52°.

Every beat, not an average

Most timegraphers average a few seconds of sound into each reading. Open Timegrapher times each beat, so it can search hours of readings for what repeats once per turn of a wheel.

Facts, not verdicts

It reports what it measured and the conditions it found: clipping, a short take, an unknown lift angle. No grades. Reading the figures is the watchmaker's job.

The math is open

Every figure has one definition, written out in The Math: how it is computed, why that way, and what it can't tell you.