M6. Averaging, Windows and Cuts
What It Is
A reading is never one beat. It is built in layers, each made only from the one above it:
Sound
↓ beats found (M1)
Beats: time, number, quality
↓ placed on true time (M3); cuts and masks applied
Rate fit: one line through every good beat in the span (M2)
10 s rate windows: a rate fit every 5 s, overlapping by half
2 s windows: each side's beats averaged into one shape (M4, M5)
↓
Reading: rate as fitted; amplitude and beat error as the median of
the 2 s windows; each with its ± (M7) and chips
How It Is Worked Out
The span. While listening, a reading covers the last Average Over seconds (10 s unless changed). For a stopped or opened take, the whole take’s reading covers each position’s measured stretch.
| Window | Length | Gives |
|---|---|---|
| 2 s window | 2 s of beats, laid end to end | Amplitude, Tick and Tock; the beat error from the unlock |
| 10 s rate window | 10 s, one every 5 s | The rate’s ±, the 5th to 95th percentile of rates, the rate chart |
Cuts. A cut is any place no reading may cross:
| Cut | What makes one |
|---|---|
| Pause | Listening stopped and started again, or the computer slept. |
| Jump | A sudden step in the beats’ timing: a knock, lost sound. |
| Position change | The watch turned to another position. |
| Mask | A stretch you masked by hand on the Paper Strip. |
| Pause between beats | More than 2 s with no beat. |
| Clock step | A step of 0.5 s or more in the clock log that no listed pause explains. |
Two rules cover them all:
- Nothing is fitted, windowed or averaged across a cut. Each stretch between cuts is read on its own. The rate and the drop’s beat error combine the stretches, weighted by the beats each used; amplitude and the beat error from the unlock are the median over every 2 s window of every stretch.
- Nothing is filled in. A window that reaches into a cut is left out. A window short of a beat or two is made from the beats it has.
Settling. After each change of position, the first seconds aren’t read while the balance settles: 20 s by default, but never more than half the position’s time. A settling time you set is used as it is.
Short stretches. A stretch between cuts whose beats span under 10 s gives no rate: a few seconds of beats give a rate several s/d out.
Why This Way
- Medians of windows for amplitude and beat error: a window with an edge marked on the wrong sound moves one window, not the reading.
- A fit for the rate: it uses every beat, and needs no windows.
- No reading across a cut: after a knock or a turn, the beats’ count and the watch itself may have changed. A reading across it would mix two states and call it one.
- No filling: an invented value looks like a measured one. A gap shows as a gap.
When You’d Use It
- Choosing Average Over (chapter 5): a short span follows a change, a long one steadies the figure.
- Masking a knock or a handling stretch on the Paper Strip, to keep it out of every reading.
- Reading a whole take in the cards’ hover, settled and in one position.
What It Helps Find
- A knock or lost sound, as a jump the readings skip.
- A reading resting on little, from its chips: 6 s of Beats, 540 of 600 Beats, Amplitude Read From 4 of 15 Windows.
What It Can’t Tell You
- What happened inside a cut. Masked or lost time is not read.
- A change faster than the span. A 10 s reading averages anything quicker than 10 s.
- Whether the windows are independent. Neighbouring readings often resemble each other; the ± allows for that (M7).
Previous: M5. Beat Error · Next: M7. The ± and Correlated Readings
This page comes from the app's user guide at v1.0.1. See it on GitHub.